The Rectified Robotics 24mm Brushless Drive is a ready to run solution to brushless drive in 3lb combat robotics. We've taken the hassle of brushless conversion and made it a new standard in performance and cost of entry. This drive comes with a larger gearbox and output shaft perfect for direct drive solutions.
24mm Brushless Drive CAD File (STEP)
24mm Brushless Drive Drawing (PDF)
- 1806 2100kv Brushless Motor
- 2s-6s Rated
- 27:1 All Metal Planetary Gearbox
- 6mm Billet Output Carrier and Shaft made from Hardened 4140
- 70g overall weight
Rectified Robotics 24mm Brushless Drives are best paired with a Blheli_32 ESC. We recommend our BLHeli_32 ESC or equivalent BLHeli_32 ESC. If using your own BLHeli_32 ESC we recommend using these settings on version 32.8. BLHeli_s is not guaranteed to provide the same performance.
Battle Hardening Recommendations:
Loctite 263 or equivalent should be used on the motor gearbox interface, Loctite 243 or equivalent should be used to retain the 4 gearbox screws for best results. If servicing, it is recommended that you use red Loctite 263 on the screws to secure the brushless motor to the adapter plate for maximum battle hardening. For Loctite to be effective you MUST wait the recommended cure time for it to set. Battle harden the motors the night before the event, not during the event!