The Rectified Robotics 22mm Brushless Drive is a ready to run solution to brushless drive in 3lb combat robotics. We've taken the hassle of brushless conversion and made it a new standard in performance and cost of entry.
22mm Brushless Drive CAD File (STEP)
22mm Brushless Drive Drawing (PDF)
Features:
- 1806 2300kv Brushless Motor
- 2s-4s Rated
- 22:1 All Metal Planetary Gearbox
- 4mm Billet Output Carrier and Shaft with Flat (22m length)
- 40g Gearbox (62g overall weight)
ESC Recommendations:
Rectified Robotics 22mm Brushless Drives are best paired with a Blheli_32 ESC. We recommend our BLHeli_32 ESC or equivalent BLHeli_32 ESC. If using your own BLHeli_32 ESC we recommend using these settings on version 32.8. BLHeli_s is not guaranteed to provide the same performance.
Battle Hardening Recommendations:
All motors come with Loctite applied. Loctite 263 is used on the motor gearbox interface, Loctite 243 is used to retain the 4 gearbox screws.
To remove the motor from the mounting plate it is recommended to use a heat gun to break the Loctite. Use a PH 1 driver.
If servicing, it is recommended that you use red Loctite 263 on the screws to secure the brushless motor to the adapter plate for maximum battle hardening. For Loctite to be effective you MUST wait the recommended cure time for it to set. Battle harden the motors the night before the event, not during the event!